Drill bits with carbide inserts |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Button Bit with Carbide Inserts |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||
-Flat face drill bit with embedded carbide buttons. |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||
-Suitable for stone walls, rubble, broken rock and medium hard rock. |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Cross Bit with Carbide Inserts |
-Standard drill bit with featuring cross cut profile with embedded carbide blades. |
- Suitable for weathered or soft rock with hard seams. |
Size | Diameter | Weight | Part Number | ![]() |
R25 | Ø42mm | 0.31 | 254422 | |
Ø51mm | 0.40 | 254512 | ||
R32 | Ø51mm | 0.41 | 324512 | |
Ø51mm L74 | 0.60 | 324512S | ||
Ø76mm | 1.20 | 324762 | ||
R38 | Ø76mm | 1.50 | 384762 | |
Ø90mm | 2.20 | 384902 | ||
R51 | Ø90mm | 2.20 | 514902 | |
Ø100mm | 2.50 | 514002 | ||
Ø115mm | 3.21 | 514152 | ||
T30 | Ø51mm | 0.42 | 304512 | |
Ø76mm | 1.27 | 304762 | ||
T40 | Ø76mm | 1.3 | 404762 | |
Ø90mm | 2.2 | 404902 | ||
T76 | Ø115mm | 3.50 | 764152 | |
Ø130mm | 4.80 | 764132 | ||
Ø200mm | 16.00 | 764202 |
Arching with Carbide Inserts |
||||||||||||
-Drill bit with arching profile, machined with Carbide Inserts. |
||||||||||||
-For general applications with soft to medium rock formations. |
||||||||||||
|
||||||||||||
Arching Button Bit with Carbide Inserts |
||||||||||||||||||||||||||||
-Drill bit with arching button bit profile, machined with Carbide Inserts. |
||||||||||||||||||||||||||||
-For general applications with soft to medium rock formations. |
||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||
Two Stages Cross Cut Bit with Carbide Inserts |
||||||||||||
-Cast cross cut bit with drop center.. |
||||||||||||
-Suitable for stiff ground, medium dense gravels and weak rock. |
||||||||||||
|
||||||||||||
Further bits are on request! |
||||||||||||||||
Drill Bit Adapter |
||||||||||||||||
|
||||||||||||||||
-Drill bit adapter enable the use of a larger diameter drill bit with a specific bar size. |
||||||||||||||||
|
||||||||||||||||